The research of our experienced technical team and R&D staff contribute to our customers' production processes and produce solutions that meet the process requirements of our customers. The experience we gained in this field allows us to develop products for high-performance polyurethane and technical parts for the automotive industry.

They are our water and solvent-based mold release agents that we have developed to ensure removing the parts which are produced from raw materials such as TDI & MDI Flexible Foam, Integral skin, Rigid, Semi-rigid, Rim, SRim, LFI, Honey Comp., Elastomer and Phenolic Felt from the mold without causing deformation. Their mixing ratios provide competitive advantages to our business partners in terms of their operations. Our products do not damage the mold used and they do not cause any dirt.

 

We can develop custom formulas to make the surface of the part look glossy and matte according to the special needs of our customers.

• Dry surface

• Wet surface

• High gloss, semi-gloss

• Matte, semi-matte

• Soft/medium/hard films

• Low consumption

• Ease of use

• Cost-effectiveness

• Smoothness on the surface

• Environment-friendly

They are high-strength liquid dispersions of organic and inorganic pigments in highly compatible coats with polyester or polyether polyurethane systems. It is used to give the desired color to the polyurethane. Our liquid colorants do not contain phthalate. It can be added to the polyol in polyurethane system with a mixing ratio of 0.5% to 5% depending on your needs.

They are suitable for automatic dosing of polyol or for mixing polyol directly with any kind of PUs. Color formulations are produced in accordance with RAL standard, Pantone Color System, or they can be customized for our customers.

 

All color tones can be formulated with high-performance UV stabilizers to effectively delay the yellowing effect of light and heat.

• It has an excellent compatibility with all polyurethane systems

•  Optimal pigment dispersion by modern dispersion machines

• High painting power

• Does not damage the form of the finished product

• Perfect dosing and rheology feature

• Causes no migration

• High light-fastness

•  Mixing ratio between 1% and 5%

• High thermal stability

• Can be dosed in standard dosage units

• Contains no heavy metal or phthalate

• Customer specific production

• Automotive PU-Integral

• Automotive PU-RIM

• Automotive PU-Flexible Foam

• Automotive PU-S-RIM

• Automotive PU-Rigid

• Automotive PU-Elastomer Mat

• Insulation PU RIGID

• Insulation PU SEMI-RIGID

Our specially designed product group, which is applied inside the mold after the application of mold release agent suitable for PU production, provides extra physical and aesthetic protection to the product and also it prevents moiré and surface defects that may arise during the reaction stage of the part taken from the mold.

 

It significantly reduces the in-mold painting, paint preparation, and application durations and gives the molded part the desired effect and feature by avoiding the imperfections in the mold.

 

Water or solvent-based formulations can be produced depending on our customers' requirements.

 

Our solvent-based products can be produced in concentrated form and can be used by diluting with our IMP THINNER No 0019.

 

Color formulations are produced in accordance with RAL standard, Pantone Color System, or they can be customized for our customers.

• Excellent light-fastness

• Excellent adhesion

• Fast drying

• High abrasion resistance

• Elasticity

• Unlimited color option

• Automotive PU-Integral

• Automotive PU-RIM

• Automotive PU-Flexible Foam

• Automotive PU-S-RIM

• Automotive PU-Rigid

• Automotive PU-Elastomer Mat

• Insulation PU RIGID

• Insulation PU SEMI-RIGID

• Mold Preparation Agents

• Anti squeak agents

• Mold and Part Cleaners